Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
C2.150%Carbon — the core element for hardness and edge keenness
CO10.000%Cobalt — strengthens the matrix and hot hardness
CR4.750%Chromium — provides stainless properties and corrosion resistance
MN0.300%Manganese — deoxidizer that also aids strength
S0.070%Sulfur — improves machinability but reduces toughness
SI0.250%Silicon — deoxidizer used in steelmaking
V6.000%Vanadium — forms hard carbides that raise wear resistance and strength
W13.000%Tungsten — improves hot hardness and wear resistance

Material Overview

CPM Maxamet is a powder metallurgy tool steel produced by Crucible Industries, designed for maximum hardness and wear resistance. Its very high carbon and alloy content delivers extreme edge retention, but its toughness is moderate and it is prone to corrosion due to being non-stainless. This steel is suitable for knives and tools where edge longevity is critical, and proper maintenance is required to prevent rust.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
10.0
Toughness
7.0
Corrosion Resistance
4.0
Sharpenability
5.0

Advantages

  • Exceptional edge retention
  • Extremely hard and wear-resistant
  • Fine powder metallurgy structure for stable edges
  • Excellent for precision cutting applications

Disadvantages

  • Low corrosion resistance (non-stainless)
  • Moderate toughness, can chip under heavy impact
  • Difficult to sharpen
  • Premium cost

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
CPM-Maxamet
Crucible Industries
64-66HRC8.510.07.04.05.0
MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0
CPM-MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0
CPM MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0

Frequently Asked Questions

What is the typical hardness of Maxamet?

Maxamet typically runs around 64-66HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is Maxamet?

The steel database rates its corrosion resistance at 4.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is Maxamet? Does it chip easily?

The steel database rates its toughness at 7.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is Maxamet good for?

Typical applications include: Specialty knives, industrial cutting tools, hard-use outdoor knives, collector knives.. Real-world results also depend on heat treatment quality and knife design.