Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon0.950-1.100%Carbon — the core element for hardness and edge keenness
CRChromium13.000-14.500%Chromium — provides stainless properties and corrosion resistance
MNManganese0.500%Manganese — deoxidizer that also aids strength
MOMolybdenum0.100-0.300%Molybdenum — boosts wear resistance, pitting resistance and hot hardness
NINickel0.490%Nickel — improves toughness and corrosion resistance
PPhosphorus0.040%Phosphorus — usually controlled as an impurity
SSulfur0.030%Sulfur — improves machinability but reduces toughness
SISilicon1.000%Silicon — deoxidizer used in steelmaking
VVanadium0.100-0.250%Vanadium — forms hard carbides that raise wear resistance and strength

Material Overview

AUS-10 is part of the Japanese AUS steel series produced by Aichi Steel Corporation. It is often compared to VG-10 but generally has slightly lower wear resistance while maintaining good toughness and easier sharpening characteristics. AUS-10 provides a balanced and practical performance profile, making it popular in affordable to mid-range knives where ease of maintenance and durability are important.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
6.0
Toughness
7.0
Corrosion Resistance
8.0
Sharpenability
8.0

Advantages

  • Easy to sharpen
  • Good corrosion resistance
  • Solid toughness for daily use
  • Affordable and widely used
  • Reliable for kitchen and EDC applications

Disadvantages

  • Lower edge retention than VG-10 and PM steels
  • Not suitable for heavy-duty cutting tasks
  • Moderate wear resistance
  • Mid-tier performance overall

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
Nitro-V
Buderus Edelstahlwerke
58-61HRC8.58.08.09.08.0
154CM
Crucible Industries
58–61 HRC8.57.07.08.08.0
OU-31
Nippon Koshuha
59–61 HRC8.08.08.08.08.0
CMV60
Takefu
59–61 HRC8.07.07.09.08.0

Frequently Asked Questions

What is the typical hardness of AUS-10?

AUS-10 typically runs around 59–61 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is AUS-10?

The steel database rates its corrosion resistance at 8.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is AUS-10? Does it chip easily?

The steel database rates its toughness at 7.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is AUS-10 good for?

Typical applications include: Kitchen knives, utility knives, EDC knives, folding knives, light outdoor knives.. Real-world results also depend on heat treatment quality and knife design.