JIS / Japan

8A

Views2

Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon0.150%Carbon — the core element for hardness and edge keenness
CRChromium0.360%Chromium — provides stainless properties and corrosion resistance
MNManganese1.030%Manganese — deoxidizer that also aids strength
MOMolybdenum0.440%Molybdenum — boosts wear resistance, pitting resistance and hot hardness
SISilicon0.330%Silicon — deoxidizer used in steelmaking

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
0.0
Toughness
0.0
Corrosion Resistance
0.0
Sharpenability
0.0

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0
CPM-MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0
CPM MagnaCut
Crucible Industries
60–64 HRC10.09.010.010.08.0
Blue Super
Hitachi
63–67 HRC9.510.07.02.07.0

Frequently Asked Questions

How rust-resistant is 8A?

The steel database rates its corrosion resistance at 0.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is 8A? Does it chip easily?

The steel database rates its toughness at 0.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is 8A good for?

Typical applications include: Low alloy, low carbon steel. Sometimes AUS8 is referred as 8A, which is incorrect, as you can see 8A is absolutely different alloy.. Real-world results also depend on heat treatment quality and knife design.