Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon2.450%Carbon — the core element for hardness and edge keenness
CRChromium5.250%Chromium — provides stainless properties and corrosion resistance
MNManganese0.500%Manganese — deoxidizer that also aids strength
MOMolybdenum1.300%Molybdenum — boosts wear resistance, pitting resistance and hot hardness
SSulfur0.070%Sulfur — improves machinability but reduces toughness
SISilicon0.900%Silicon — deoxidizer used in steelmaking
VVanadium9.750%Vanadium — forms hard carbides that raise wear resistance and strength

Material Overview

CPM 10V is a powder metallurgy tool steel produced by Crucible Industries, engineered for maximum wear resistance through a very high vanadium content. It forms a dense network of vanadium carbides that significantly improves edge retention and cutting durability. While it offers better toughness than ultra-extreme steels like CPM 15V or CPM S125V, it is still a non-stainless steel requiring maintenance. It is widely respected for balancing extreme wear resistance with usable toughness in hard-use applications.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
10.0
Toughness
7.0
Corrosion Resistance
3.0
Sharpenability
4.0

Advantages

  • Excellent edge retention
  • Very high wear resistance
  • Better toughness than ultra-extreme vanadium steels
  • Fine CPM structure improves consistency
  • Strong performance in abrasive cutting tasks

Disadvantages

  • Difficult to sharpen
  • Low corrosion resistance (non-stainless)
  • Requires maintenance to prevent rust
  • Not ideal for fine slicing or low-maintenance users

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
CPM-15V
Crucible Industries
60–65 HRC9.510.06.03.03.0
15V
Crucible Industries
60–65 HRC9.510.06.03.03.0
CPM 15V
Crucible Industries
60–65 HRC9.510.06.03.03.0
CPM-10V
Crucible Industries
60–64 HRC9.010.07.03.04.0

Frequently Asked Questions

What is the typical hardness of 10V?

10V typically runs around 60–64 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is 10V?

The steel database rates its corrosion resistance at 3.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is 10V? Does it chip easily?

The steel database rates its toughness at 7.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is 10V good for?

Typical applications include: Heavy-duty EDC knives, industrial cutting tools, woodworking tools, outdoor knives, high-performance fixed blades.. Real-world results also depend on heat treatment quality and knife design.