Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
C1.100%Carbon — the core element for hardness and edge keenness
CR7.250%Chromium — provides stainless properties and corrosion resistance
MO1.600%Molybdenum — boosts wear resistance, pitting resistance and hot hardness
S0.000%Sulfur — improves machinability but reduces toughness
SI1.200%Silicon — deoxidizer used in steelmaking
V2.400%Vanadium — forms hard carbides that raise wear resistance and strength
W1.150%Tungsten — improves hot hardness and wear resistance

Material Overview

CPM Cru-Wear is a powder metallurgy tool steel developed by Crucible Industries as a high-performance alternative to conventional tool steels like D2. It offers improved toughness, better wear resistance, and finer carbide distribution thanks to the CPM process. While it is not stainless, it provides a very balanced performance profile, making it popular among knife makers who want durability and strong cutting performance without extreme brittleness.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
8.0
Toughness
9.0
Corrosion Resistance
4.0
Sharpenability
7.0

Advantages

  • Excellent toughness
  • Strong overall balance of properties
  • Improved wear resistance over D2
  • Fine CPM structure improves edge stability
  • Great for hard-use knives

Disadvantages

  • Low corrosion resistance (non-stainless)
  • Requires maintenance to prevent rust
  • Not as wear-resistant as ultra-high vanadium steels
  • Edge retention lower than S90V / M390 class steels

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
CPM CruWear
Crucible Industries
60–64 HRC9.08.09.04.07.0
CPM Cru-Wear
Crucible Industries
60–64 HRC9.08.09.04.07.0
Cru Wear
Crucible Industries
60–64 HRC9.08.09.04.07.0
CPM Cru Wear
Crucible Industries
60–64 HRC9.08.09.04.07.0

Frequently Asked Questions

What is the typical hardness of Cru-Wear?

Cru-Wear typically runs around 60–64 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is Cru-Wear?

The steel database rates its corrosion resistance at 4.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is Cru-Wear? Does it chip easily?

The steel database rates its toughness at 9.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is Cru-Wear good for?

Typical applications include: EDC knives, outdoor knives, hunting knives, tactical knives, bushcraft knives, workshop tools.. Real-world results also depend on heat treatment quality and knife design.