Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon1.250-1.350%Carbon — the core element for hardness and edge keenness
CRChromium0.300-0.500%Chromium — provides stainless properties and corrosion resistance
MNManganese0.200-0.300%Manganese — deoxidizer that also aids strength
PPhosphorus0.030%Phosphorus — usually controlled as an impurity
SSulfur0.000%Sulfur — improves machinability but reduces toughness
SISilicon0.100-0.200%Silicon — deoxidizer used in steelmaking
WTungsten1.500-2.000%Tungsten — improves hot hardness and wear resistance

Material Overview

Blue #1 (Blue Paper Steel #1) is one of the highest-performance traditional carbon steels produced by Hitachi. It is based on Shirogami (White Steel) with the addition of tungsten and chromium to improve wear resistance and edge retention. Compared to Aogami #2, Aogami #1 contains more carbon, allowing it to achieve higher hardness and longer edge life. It is highly regarded by Japanese bladesmiths for its ability to take an extremely fine edge and maintain exceptional cutting performance. However, its increased hardness comes with reduced toughness and very low corrosion resistance, requiring careful maintenance. It is widely used in premium Japanese kitchen knives and traditional woodworking tools.

Comparable Steels:

  • Aogami #1 > Aogami #2 in edge retention and hardness

  • Aogami #1 ≈ CTS-XHP in cutting longevity

  • Aogami #1 < ZDP-189 in wear resistance

  • Aogami #1 > 52100 in sharpness potential

  • Aogami #1 < CPM MagnaCut in corrosion resistance and overall versatility

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
9.0
Toughness
7.0
Corrosion Resistance
2.0
Sharpenability
8.0

Advantages

  • Exceptional edge retention
  • Extremely high sharpness potential
  • Fine grain structure
  • Excellent cutting efficiency
  • Highly valued in traditional Japanese craftsmanship

Disadvantages

  • Very low corrosion resistance
  • Requires regular cleaning and oiling
  • More brittle than Aogami #2
  • Can chip under improper use
  • Not suitable for wet or marine environments

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
Aogami Super
Hitachi
63–67 HRC9.510.07.02.07.0
Blue Super
Hitachi
63–67 HRC9.510.07.02.07.0
Aogami #1
Hitachi
62–66 HRC9.09.07.02.08.0
Aoniko
Hitachi
61–65 HRC9.08.08.02.08.0

Frequently Asked Questions

What is the typical hardness of Blue #1?

Blue #1 typically runs around 62–66 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is Blue #1?

The steel database rates its corrosion resistance at 2.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is Blue #1? Does it chip easily?

The steel database rates its toughness at 7.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is Blue #1 good for?

Typical applications include: High-end kitchen knives, sushi knives, chef knives, woodworking tools, collector knives, precision cutting tools.. Real-world results also depend on heat treatment quality and knife design.