Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon1.050-1.150%Carbon — the core element for hardness and edge keenness
CRChromium0.200-0.500%Chromium — provides stainless properties and corrosion resistance
MNManganese0.200-0.300%Manganese — deoxidizer that also aids strength
PPhosphorus0.030%Phosphorus — usually controlled as an impurity
SSulfur0.000%Sulfur — improves machinability but reduces toughness
SISilicon0.100-0.200%Silicon — deoxidizer used in steelmaking
WTungsten1.000-1.500%Tungsten — improves hot hardness and wear resistance

Material Overview

Aogami #2 (Blue Paper Steel #2) is one of the most respected traditional Japanese carbon steels produced by Hitachi. It is based on Shirogami steel with the addition of tungsten and chromium, which improve wear resistance and edge retention while preserving excellent sharpening characteristics. Compared to Aogami #1, it contains slightly less carbon, resulting in improved toughness and reduced chipping risk. Many Japanese knife makers consider Aogami #2 the ideal balance within the Blue Steel family, offering outstanding cutting performance, long edge life, and practical durability. It is widely used in high-end kitchen knives and handcrafted cutting tools.

Comparable Steels:

  • Aogami #2 > Shirogami #2 in edge retention

  • Aogami #2 < Aogami #1 in maximum hardness

  • Aogami #2 > 1095 in wear resistance and refinement

  • Aogami #2 ≈ 52100 in toughness, but offers higher hardness potential

  • Aogami #2 < CPM-S90V and M398 in wear resistance

  • Aogami #2 > VG-10 in sharpening feel and edge keenness

  • Aogami #2 < CPM MagnaCut in corrosion resistance and versatility

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
8.0
Toughness
8.0
Corrosion Resistance
2.0
Sharpenability
8.0

Advantages

  • Excellent edge retention
  • Outstanding cutting performance
  • Better toughness than Aogami #1
  • Easy to sharpen for a high-hardness steel
  • Fine grain structure allows very keen edges
  • Highly regarded by traditional Japanese craftsmen

Disadvantages

  • Very low corrosion resistance
  • Requires regular maintenance and drying
  • Can develop patina and rust quickly
  • Less wear resistant than modern PM super steels
  • Not ideal for humid or marine environments

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
Aogami Super
Hitachi
63–67 HRC9.510.07.02.07.0
Blue Super
Hitachi
63–67 HRC9.510.07.02.07.0
Aogami #1
Hitachi
62–66 HRC9.09.07.02.08.0
Aoniko
Hitachi
61–65 HRC9.08.08.02.08.0

Frequently Asked Questions

What is the typical hardness of Aogami 2a?

Aogami 2a typically runs around 61–65 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is Aogami 2a?

The steel database rates its corrosion resistance at 2.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is Aogami 2a? Does it chip easily?

The steel database rates its toughness at 8.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is Aogami 2a good for?

Typical applications include: Chef knives, gyutos, santokus, hunting knives, woodworking tools, bushcraft knives, traditional Japanese blades.. Real-world results also depend on heat treatment quality and knife design.