Composition

Core alloying elements define the baseline trade-off between wear resistance, corrosion behavior, and toughness.

ElementContentPrimary Role
CCarbon1.250-1.450%Carbon — the core element for hardness and edge keenness
CRChromium14.000-16.000%Chromium — provides stainless properties and corrosion resistance
MNManganese2.300-3.300%Manganese — deoxidizer that also aids strength
MOMolybdenum2.300-3.300%Molybdenum — boosts wear resistance, pitting resistance and hot hardness
PPhosphorus0.030%Phosphorus — usually controlled as an impurity
SSulfur0.030%Sulfur — improves machinability but reduces toughness
SISilicon0.500%Silicon — deoxidizer used in steelmaking
VVanadium1.000-2.200%Vanadium — forms hard carbides that raise wear resistance and strength

Material Overview

3G (also known as R2 or SGPS) is a Japanese powder metallurgy stainless steel produced by Takefu Special Steel. It is widely used in premium kitchen knives due to its extremely fine carbide structure, which allows for very sharp edges and excellent cutting performance. SG2 offers strong wear resistance and good corrosion resistance, while remaining relatively more manageable to sharpen compared to ultra-high-vanadium steels. It is especially popular in high-end Japanese cutlery.

Performance Radar

Use four core metrics to understand the usable operating envelope of this steel at a glance.

Edge Retention
Toughness
Corrosion Resistance
Sharpenability
Edge Retention
9.0
Toughness
7.0
Corrosion Resistance
9.0
Sharpenability
6.0

Advantages

  • Excellent edge retention
  • Very fine grain structure for razor-sharp edges
  • Good corrosion resistance
  • High hardness capability
  • Smooth cutting performance

Disadvantages

  • Moderate toughness compared to newer PM steels
  • More difficult to sharpen than basic stainless steels
  • Higher cost due to premium manufacturing process
  • Not ideal for heavy impact use

Similar Steels Comparison

Compare core performance dimensions against steels of the same type, powered by the steel database ratings.

SteelHardnessOverall ScoreEdge RetentionToughnessCorrosion ResistanceSharpenability
M398
Bohler-Uddeholm
62-64HRC9.510.07.09.06.0
M390
Bohler
58-62 HRC9.59.58.09.07.0
CPM-MagnaMax
Crucible Industries
58-61HRC9.09.09.010.07.0
CPM MagnaMax
Crucible Industries
58-61HRC9.09.09.010.07.0

Frequently Asked Questions

What is the typical hardness of 3G?

3G typically runs around 59–62 HRC (HRC, Rockwell hardness). Actual blades may vary slightly depending on the heat treatment and batch.

How rust-resistant is 3G?

The steel database rates its corrosion resistance at 9.0/10 — the higher the score, the better it resists rust in humid or corrosive environments.

How tough is 3G? Does it chip easily?

The steel database rates its toughness at 7.0/10 — the higher the score, the better it handles hard use, prying and cutting abrasive materials.

What kinds of knives is 3G good for?

Typical applications include: Kitchen knives, chef knives, premium EDC knives, folding knives, high-end slicing tools.. Real-world results also depend on heat treatment quality and knife design.