Vosteed Mink Review: The Brand's First Fixed Blade Sets a High Bar for $69

Vosteed's first-ever fixed blade pairs Nitro-V with frag-milled Micarta and a sheath that usually costs extra

3 min read
Published:2026-11-16Fixed Blade17 ViewsShare:

"The Mink is a modern interpretation of a traditional blade." That line sits at the top of Vosteed's own product copy, and it frames what matters here: this is the first fixed blade the company has ever shipped, from a brand that built its reputation on folders with crossbar and top liner locks. Getting the first one right matters more than usual.

The reviews landing this week suggest Vosteed did. Wayne Walter of Wayne's Sharp World, reviewing for KnifeInformer on November 15, called the Mink easily the best budget fixed blade he has handled and put its ergonomics alongside the Chris Reeve Backpacker, a knife that costs several times more. He is careful to note he is not a fixed-blade specialist, which makes the praise harder to dismiss rather than easier.

Vosteed Mink fixed blade with green frag-milled Micarta handle next to its Kydex sheath

The numbers back the layout. The Mink is a full-tang clip point with a 3.33-inch Nitro-V blade on 0.118-inch stock, flat ground with HRC listed at 59 plus or minus 1. Overall length runs 7.13 inches with a 3.82-inch handle, and the whole package weighs 5.12 ounces with the sheath. Walter measured the edge at 0.015 inch behind the sharpening shoulder, thin enough that he describes the blade as super slicey with a usable slicing tip, and he sees it working as either an EDC fixed blade or a light hunting knife.

Two details separate it from the usual $60 fixed blade. The first is the handle: Micarta scales screwed to the tang, with a frag pattern milled into them and dual-section jimping on the spine, one section back for a normal grip and one farther forward for choke-up cuts. Walter liked the black-and-green version he reviewed and admitted he usually prefers satin blades over coated ones. The second is the sheath, a Kydex rig with an adjustable belt clip, and he had the strongest words for it: on knives this cheap the sheath is usually garbage, and here the retention pops the knife in and out with no wiggle.

Close view of the frag pattern milled into the Mink's Micarta handle

What it costs and where to find one

The Mink line runs deeper than the flagship. The 3.33-inch Nitro-V Micarta versions are $69 on Vosteed, a 3.99-inch Nitro-V version is $79, AEB-L variants are $54.95, and 14C28N builds sell as Amazon and TikTok exclusives at $59.95. Every version shows sold out on Vosteed's own collection page right now, while dealers still have stock, with one listing the black Micarta Nitro-V at $69 and reporting 345 units on hand.

$69 for a full-tang Nitro-V fixed blade with a usable sheath, or $54.95 if AEB-L is enough steel for the job.

—/ 5.0
(No ratings yet)