A thumb rolls the flipper tab, the blade snaps out to a hard stop, and the button under the thumb drops it shut again without a shake. That sequence, repeated a hundred times at a desk, is what sells a button lock, and the Kosame is the first Kansept where it feels tuned rather than assembled.

The knife is a 3.37-inch Wharncliffe in 154CM, 0.118 inch thick, flat ground to a tip that sits low and straight. Wharncliffe geometry does one thing better than any other shape: a draw cut that starts at the heel and finishes at the point without the blade steering off line. On a 7.96-inch overall package, that makes the Kosame a box cutter that happens to look good.
Kansept built the frame in blackwash titanium and then did something less common at this price. The inlays are set into milled pockets from the inside, held by screws that are completely hidden once the handle is assembled. Blue, copper and jade variants exist, and the carbon fiber versions carry a different inlay pocket depth. Nothing on the outside of the handle shows hardware except the pivot.
Weight is 4.13 ounces, which is honest for a full titanium frame with a steel lock interface and a steel-lined button. The clip is milled titanium with a ramp at the mouth and enough tension to hold a jeans pocket without shredding it, and it is right-hand tip-up only. Left-handed buyers have no option here, which is the one place the design gives something up.
The flipper tab has no jimping. Kansept relies on the detent and the tab's angle instead, and the trade shows up when a wet thumb slips off during the first attempt. It is a small thing, and the fix would cost a machining step.
Pricing runs $112.89 for the blue G10 inlay, $116.89 for the black and red G-mascus, and $119.89 for the copper or blue carbon fiber versions. Several of those are already showing as sold out on Kansept's own store, which is worth checking before picking a color.