A Trapper is supposed to be two blades, a backspring and a nail nick. The CobraTec Trapper Hidden Release has one blade, no nail nick you need, and a spring tucked under the bolster where a slip joint would have its pivot pin.
Lift the bolster and the blade fires. Lift it again and the lock lets go. Nothing on the outside of the knife says automatic, which is the entire point of the pattern, and the price is $89.99 for the polished white bone version, model CTTHRPBWT.

The knife that started the argument was bought at a gun and knife show, and the seller described it as a collaboration. The buyer posted photos to r/knives and asked for confirmation rather than assuming it.
Got this today at a gun and knife expo. I was told it was a collaboration between Moore maker knives and Cobratec knives. Can anyone help to confirm? I feel like slapping a makers stamp on a Cobratec and selling it as a collaboration would be a really easy way to get a major lawsuit.
u/Danwesson44mag, r/knives
What the bolster does that a button cannot
The mechanism is patented and it lives in the front bolster instead of the handle scale. Pushing the bolster upward trips the release, the blade swings out under spring pressure, and pushing it again unlocks the tang so the blade closes. There is no button, no slider and no safety to explain, which keeps the silhouette of a 19th-century pattern intact.
The trade is that the knife is an automatic in every legal sense. Federal law restricts interstate shipment of switchblades to civilians, and state rules vary widely, so a Trapper that looks like grandad's does not carry like grandad's. Buyers in restricted states should read their own statute before ordering, not the product page.
- Blade: satin D2 drop point, 3.125 in
- Handle: 4.25 in, 7.375 in overall, 4 oz
- Covers: polished white bone with steel bolsters
- Deployment: patented hidden bolster release, no visible switch
Five covers, two steels
CobraTec builds the pattern across a small range. The olivewood version sits at $89.99 with the same D2 blade. Stag and golden horn both run $119.99. The snakewood model steps up to 154CM at $129.99, which is the only variant in the line that changes alloy.
| Version | Cover | Steel | Price |
|---|---|---|---|
| Trapper HR Polished Bone White | Bone | D2 | $89.99 |
| Trapper HR Olivewood | Olivewood | D2 | $89.99 |
| Trapper HR Stag | Stag | Not disclosed | $119.99 |
| Trapper HR Golden Horn | Golden horn | Not disclosed | $119.99 |
| Trapper HR Snakewood | Snakewood | 154CM | $129.99 |
D2 at this price is a known quantity: high wear resistance, low stain resistance, and an edge that holds through cardboard but wants oil on a humid day. The same company backs every knife with a lifetime warranty and repairs or replaces at no charge, which is a bigger deal on an auto than on a manual knife, because springs and release levers are the parts that fail.
The stamp question
Moore Maker is a Texas company that built its name on traditional patterns, and a Moore Maker stamp on a bone Trapper would not raise an eyebrow. A Moore Maker stamp on a CobraTec-made automatic is a different claim, and as of 9 November neither company had published an announcement, a joint SKU or a co-branded box that would settle it.
What a real collaboration usually leaves behind: a model number that appears in both catalogs, a certificate in the box, and a page on the brand's own site. A dealer with a stack of knives at a gun show has none of that, which does not make the knife fake, but it does mean the buyer is being asked to take a story on faith. CobraTec's own listing for this pattern carries no second maker's name anywhere on it.
The knife itself is unchanged either way. The question is what the extra stamp is supposed to add, and at $89.99 for a bone-covered auto in a slip-joint silhouette, what is left for a maker's stamp to prove?