Bestechman Lanza: 1.48 Ounces of 14C28N for $52

A 3.45-inch front flipper with 0.087-inch stock, a pen-style clip and almost no weight

3 min read
Published:2026-11-21Folding Knives10 ViewsShare:

"This is a budget knife-of-the-year contender, and I did not see it coming," KnifeInformer's Wayne Walter wrote after a few weeks with the Lanza, and the reason is arithmetic rather than enthusiasm. A 3.45-inch blade at 1.48 ounces with a reversible clip and a $51.90 list price is a combination that usually involves a compromise somewhere.

What 0.087 inch of stock does

Blade stock is the number that shapes everything else on this knife.

  • At 0.087 inch, the Lanza is thinner than a pen body at the spine, and the flat grind carries that thinness down to roughly 0.018 or 0.019 inch behind the edge.

  • The drop point runs a long swedge from the spine to the tip, which pulls weight off the front without hollowing the grind.

  • Thin stock and a thin edge mean it cuts like a knife twice its width, and it will not pry, baton or take a sideways load without complaining.

The clip is the second-best part

Most budget knives treat the clip as an afterthought bolted on at the end. This one is a single piece of steel with no filler tab, shaped to sit against the palm the way a pen clip does.

  • It reverses for left or right hand, tip-up, with one screw.

  • The knife rides in a pocket like a marker, with about an inch of handle above the seam.

  • The standoffs at the butt are machined flat, so the clip anchors to a solid block rather than a thin scale.

Steel and lock

Bestechman has leaned on D2 for years, and the Lanza is the model where that changed.

  • 14C28N at a claimed 58 to 60 HRC, a nitrogen-bearing Swedish stainless that takes a fine edge and resists staining far better than D2.

  • A liner lock behind G10 scales, with a detent that the reviewer describes as the best part of the action.

  • Front flipper only. No thumb stud, no cutout, nothing on the presentation side.

Versions and what they cost

The Lanza ships in more variants than most budget models get in a full year.

  • BMK14A through BMK14G: 14C28N, G10, $51.90 list and $42.90 on the company's site.

  • BMK14-D series: Damascus blade with G10, rosewood or olive wood scales, $64.90 list and $54.90 on sale.

  • Handle length is 4.04 inches, overall length 7.49 inches, designer Grzegorz Grabarski.

Both lines are listed as in stock at Bestechman this week, with the 14C28N versions at $42.90 and the Damascus versions at $54.90.

—/ 5.0
(No ratings yet)